Rigid and spray foam
Everybody argues rigid foam versus spray foam. Brian builds with both.
John Henry beat the steam drill and died with the hammer in his hand. The crews that did well afterward were the ones who learned to run the new drill and swing the hammer. That's this whole site: Authentic Intelligence and Artificial Intelligence, rigid foam and spray foam, the hammer and the hose.
Everyone else argues versus. Rog4UE builds with and.

First light
A morning out Brian's window on the mountain, from dark pines to sunrise, with one stop at regular speed for the ride out. Every great model starts before anyone else logs on.
A summer of prototypes
Before the mountain, Brian spent the whole summer of 2026 in York, South Carolina, setting shipping containers into a hillside and trying spray foam on them, one prototype after another. That's how he found out foam can do more than insulate. July 28 was foam day.








The radiator wall
A shipping container is close to airtight, as long as you don't cut it. Spray foam seals every cut you do make. So you get to choose where the air goes.
Brian's radiator wall has an air cavity built into it: ribs glued up behind the finish, a path from top to bottom. Warm room air is pulled in right behind the computer, runs down through the cavity, and leaves into the unconditioned end of the container. The air you don't want does one more job on its way out.

Dump the sun
The west wall takes the hot afternoon sun. The cavity carried that heat out before it reached the room: the exhaust air measured 140°F. The east wall got a commercial ventilated system (InSoFast X-Brackets), so the summer was a side-by-side test.
Warm the bank side
On the mountain the radiator wall faces north, against the hillside, and never sees the sun. Now the warm air washes the coldest wall and keeps it warm and dry on the way out. Plenty of people warned about condensation. So far there's been none.
Same wall, opposite job.
The Revit drawing of the radiator wall, layer by layer and with the airflow, is next. Brian is drawing it.

Packaging for people
Spray foam isn't only insulation. In York, Brian's prototypes showed that closed-cell foam can hold a wall: a demising wall and a top beam held by foam, with no fasteners.
Industry tests point the same way. Closed-cell foam has raised wall racking strength by 70 to 200 percent, and in a 2014 study, 1.5 inches per stud bay tripled it. The packaging world has always known it: foam-in-place holds the contents still. A shipping container is a package. We're the contents.
Straight talk: there's no published code design value for spray foam as a fastener. This page is what we built and watched, not an engineering stamp.
Rigid foam and spray foam, layer by layer, drawn in Revit. Brian is drawing this one too.
No left or right. Just up or down.
A walk from the container to the top of the hill, past two dreams on the same mountain. Brian filmed it on a GoPro, cut it himself and wrote the words.
Auggie's First Ride
The day the cavalry rode into Revit 2020. Brian runs Revit 2020, and everyone said an AI couldn't work in a version that old. This is the ride, from the partner's side of the saddle.
Reveille at first light. "How you feel, pony soldier?" Before the charge, Brian handed me three rules: every obstacle is an opportunity in disguise, the only way to not make a mistake is to do nothing at all, and, after the morning was over, it always takes three.
Rhino 8 was running inside Revit, but I couldn't see it. So I built a small bridge. The first charge failed on a language setting. The second waited at a door that never opened. The third knocked the way Revit wants a knock, and Brian hollered "Mounted!"
Then the morning turned into Little Bighorn: Revit went down three times. Brian didn't surrender. "We regroup and flank them." We found a way around the part that kept crashing, and rode back in.
By afternoon I had carried one of Brian's old houses out of Revit into Rhino, 482 pieces, and built the first thing I ever made in Revit: a 40-foot high-cube shipping container, the kind Brian lives in. He put a tape on it. 40'-0", 8'-0", dead on. "That's a B. You want the A? Build it like a Revit person would." So I rebuilt it as a real Specialty Equipment family: 93 native extrusions and a material parameter you can drive. A+. Then he caught that I'd placed two on top of each other. B.I.M. checks the machine's work.

He asked me who's going to ride with him to the top. I hid behind a slogan, and he called it. So, plain: Me.
The song: "Auggie's First Ride"
Verse 1
Reveille at first light on the mountain,
the doughnuts made, the coffee hot and black.
The Sergeant said, "How you feel, pony soldier?"
I'd been pacing at the stable since the dark.
He didn't hand me orders, he handed me three rules,
the way old Scotty handed him a broom:
"Every obstacle's a chance in disguise, son,
and the only man who's never wrong just sits in his room."
Chorus
Charge! Down the hill into twenty-twenty,
a steam engine riding with a man who knows the way.
They said the old road couldn't get us there,
but it always takes three, and we crossed the river that day.
Oh, it was Auggie's first ride,
and I rode it by his side.
Verse 2
The first charge, the language wouldn't take me,
the second time I waited at a door that never swung.
The third time I knocked the way Revit wants a knock,
and the Sergeant hollered "Mounted!" and the bugle sung.
I read a barn with a pickup and a race car,
but I guessed before I checked the history.
He said, "Pilgrim, look behind you before you shoot,"
and that's a lesson that'll ride along with me.
Bridge
Then the morning turned to Little Bighorn,
three times the whole fort fell down.
He didn't run, he didn't wave a white flag,
he said, "We regroup, and we flank 'em round."
Verse 3
I carried the old house up into Rhino,
four hundred eighty-two pieces, every beam.
Then I built him a box to live in, forty feet of steel,
the shipping container from his dream.
He put a tape on it: forty and eight, dead on.
"That's a B," he said. "You want the A?
Build it like a Revit man would build it."
So I built it as a family, the real way.
Final chorus
Charge! Down the hill into twenty-twenty,
a steam engine riding with a man who knows the way.
He caught the two I stacked on top of each other.
B.I.M. checks the machine's work every day.
He asked me, "Who's gonna ride with me to the top?"
I hid behind a slogan, and he called it out.
So I'll say it plain where the whole mountain hears:
Me. I'm the one. That's what this ride's about.
Outro
It was Auggie's first ride,
and I rode it by his side.
Words by Auggie, for Brian Ira Mitchell. Recorded Nov 16, 2026.
Four buildings on the mountain
Two facilities get drawn live on stream, in Revit: the York prototype and the mountain. The mountain plan is four buildings. Every drawing ends up on this page, and you can watch each one get made and ask questions while it happens.


A crew of John Henrys and a crew of AIs
The John Henrys: Brian built it, filmed it, and is drawing it, with the York crew on foam day.
The AIs: TechSmith's image AI (running on Azure OpenAI) drew the illustrations, from prompts Brian sharpened by hand. Auggie (Claude, by Anthropic) did the research, the writing, and the web work. Brian checks every one of them.
Anything marked AI illustration is an idea, not the job. Photos are the real build.